Setpoint descriptions

Kiln Initial Temperature Approach Threshold:

• This can be adjusted to widen or narrow approach window for the burner control as kiln approaches the initial temperature setpoint. 
• Larger number: lower overshoot
• Smaller number: higher potential overshoot
• Variable: PIDTempApproach_F
• Use Connect Screen, connect to Kiln Base, and adjust the above Variable in the Public Table of the Base station

HopDropTime_min

• duration the system will hold the Kiln Temp setpoint before re-checking to adjust downward, in AutoTempStage 2.

AutoTempStage

• 0 is initial heat, burner output is fixed, system checks for Kiln Temp to reach Kiln Initial Temp Setpoint
• 1 is Overshoot, burner adjusts to meet Kiln Temp Setpoint, intended to be aggressive 
• 2 is Dropping Temp Setpoint, system is periodically adjusting the Kiln Temp Setpoint to meet the target Hop Temp Setpoint
• 3 is Steady State, Kiln Temp Setpoint matches Hop Temp Setpoint